Chapter 18

Please enter your email:

1. Preincident planning may not be your responsibility to develop, but you may be required to implement the plan as directed by the:

 
 
 
 

2. Which of the following may occur when covers for water chutes and catchalls are limited during loss control?

 
 
 
 

3. Backpack-type water vacuum tanks normally have a capacity of:

 
 
 
 

4. Which of the following BEST describes a catchall?

 
 
 
 

5. Thermal imagers (TIs) used for overhaul operations after a fire incident are used to identify which of the following?

 
 
 
 

6. A catchall may be temporary to control large amounts of water until chutes are constructed:

 
 
 
 

7. Who is responsible for the authorization of when overhaul procedures should begin once the fire incident is under control?

 
 
 
 

8. Water vacuums are used:

 
 
 
 

9. Which of the following is the most common method used for two- firefighter deployment of large salvage covers?

 
 
 
 

10. Which of the following are used to catch and carry debris or work as a water basin to immerse small burning objects?

 
 
 
 

11. When performing salvage operations, firefighters:

 
 
 
 

12. The philosophy of loss control is to perform activities to minimize losses to property:

 
 
 
 

13. When does splicing covers with watertight joints becomes necessary?

 
 
 
 

14. During salvage procedures, where should the contents of the structure be placed once they are removed?

 
 
 
 

15. Damage resulting from fire suppression activities is referred to as:

 
 
 
 

16. In a preincident plan, which of the following is a means of protecting items in a residential or business-occupied structure?

 
 
 
 

17. Interacting with the business owner or representative is a good opportunity to:

 
 
 
 

18. Protecting the contents of rooms immediately below the fire floor with salvage covers while fire suppression operations are conducted is performing a:

 
 
 
 

19. Special preincident plans for loss control are developed:

 
 
 
 

20. Which of the following gives a parachute effect to float a salvage cover into place over the article to be covered during loss control?

 
 
 
 

21. Firefighters can detect hidden fires by:

 
 
 
 

22. Which of the following is the main advantage of using a one-firefighter spread with a rolled salvage cover?

 
 
 
 

23. Which of the following is one of the most practical methods of removing water coming through a ceiling from an upper floor?

 
 
 
 

24. Which of the following determines the extent that structural members of a building are weakened?

 
 
 
 

25. Which of the following may damage merchandise on lower floors after the fire is controlled in a commercial building?

 
 
 
 

26. Vulnerability to weather and vandalism following fire suppression activities are forms of:

 
 
 
 

27. When and how built-in fire suppression systems are to be supported for loss control are identified in the:

 
 
 
 

28. What is the BEST reason for removing contents from a structure during salvage procedures?

 
 
 
 

29. Which of the following materials are salvage covers for loss control typically made of?

 
 
 
 

30. Which of the following helps prevent damage to furniture during salvage operations?

 
 
 
 

31. When contents of a structure have been stored outside after a fire incident during loss control, who should be made aware of the location of the contents?

 
 
 
 

32. Devices used to remove water from basements and elevator shafts are referred to as:

 
 
 
 

33. What material must be used to cover openings cut in upper stories’ floors or over basements or crawl spaces during a fire incident?

 
 
 
 

34. When salvage operations are performed and contents are removed from the structure, the salvage operations may:

 
 
 
 

35. All firefighting personnel should continue to use self-contained breathing apparatus (SCBA) until:

 
 
 
 

36. Special loss-control-related concerns are identified and addressed:

 
 
 
 

37. Damage caused by fire and smoke is referred to as:

 
 
 
 

38. Salvage and overhaul are tactics:

 
 
 
 

39. What should be done with large smoldering items during overhaul procedures after a fire incident?

 
 
 
 

40. Which of the following should take place before starting a search for hidden fires in a fire incident structure?

 
 
 
 

41. Firefighters will typically begin overhaul in areas:

 
 
 
 

42. If there are any discrepancies between a thermal imager (TI) and the signs of a fire in a concealed place, which of the following should be done?

 
 
 
 

43. At what point do appropriate salvage procedures begin at a fire incident?

 
 
 
 

44. Which of the following examples of salvage equipment must have a horizontal ledge from which to hang salvage covers?

 
 
 
 

45. Automatic sprinkler tongs, stoppers, and wedges are tools used to:

 
 
 
 

46. Pulling open areas around burned windows or doors during fire overhaul to expose inner parts of the frame or casing is done to:

 
 
 
 

47. Depending on the size and organization of a fire department, salvage operations are generally assigned to which of the following?

 
 
 
 

48. Wiping off water left on cabinets or other horizontal surfaces with paper towels during loss control is done to:

 
 
 
 

49. Which of the following may delay suppression activities for a short time to remove vital contents as part of loss control?

 
 
 
 

50. Which of the following is used to help prevent unintentional damage done by firefighters’ boots and equipment during fire suppression operations?

 
 
 
 

51. Which of the following techniques for loss control allows water to run off without collecting in the depressions?

 
 
 
 

52. Which of the following is the main advantage to using spliced water chutes as catchalls during loss control?

 
 
 
 

53. Charged hoselines should be present during overhaul operations of a fire incident:

 
 
 
 

54. Which of the following methods would MOST often be used for protecting contents in a fire incident?

 
 
 
 

55. What building material can retain hidden fires for prolonged periods of time during overhaul procedures?

 
 
 
 

56. To keep the exit route from being blocked with falling debris, the best place to position yourself when pulling down any ceiling during fire overhaul is:

 
 
 
 

57. Which of the following examples of salvage equipment is driven into walls or wooden framing to hang salvage covers on walls to protect wall-mounted book cases or shelving units?

 
 
 
 

58. Which of the following is the first consideration to make before beginning the overhaul procedures after a fire incident?

 
 
 
 

59. Which of the following procedures includes moving contents to a safe location in the fire incident structure?

 
 
 
 

Question 1 of 59